مرجع API برای توسعه دهندگان v3

شروع شدن

یک کلید API برای پردازش درخواست‌ها توسط سیستم مورد نیاز است. پس از ثبت نام کاربر، یک کلید API به طور خودکار برای این کاربر ایجاد می شود. کلید API باید با هر درخواست ارسال شود (نمونه کامل زیر را ببینید). اگر کلید API ارسال نشود یا منقضی شده باشد، خطایی رخ می دهد. لطفاً برای جلوگیری از سوء استفاده، کلید API خود را مخفی نگه دارید.

احراز هویت

برای احراز هویت با سیستم API، باید با هر درخواست، کلید API خود را به عنوان نشانه مجوز ارسال کنید. نمونه کد را می توانید در زیر مشاهده کنید.

curl --location --request POST 'https://3d-ul.ir/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \ 
$curl = curl_init();
curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/url/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
    "Authorization: Bearer YOURAPIKEY",
    "Content-Type: application/json",
    ),
));

$response = curl_exec($curl);
حد نرخ

API ما دارای یک محدود کننده نرخ برای محافظت در برابر افزایش درخواست ها برای به حداکثر رساندن ثبات آن است. محدود کننده نرخ ما در حال حاضر به میزان 30 درخواست در هر 1 دقیقه محدود شده است.

چندین هدر در کنار پاسخ ارسال می شود و می توان آنها را برای تعیین اطلاعات مختلف در مورد درخواست بررسی کرد.

X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP
مدیریت پاسخ

تمام پاسخ های API به طور پیش فرض در قالب JSON برگردانده می شوند. برای تبدیل آن به داده های قابل استفاده، تابع مناسب باید مطابق با زبان استفاده شود. در PHP، تابع json_decode() می تواند برای تبدیل داده ها به یک شی (پیش فرض) یا یک آرایه (پارامتر دوم را روی true قرار دهید). بسیار مهم است که کلید خطا را بررسی کنید، زیرا اطلاعاتی در مورد وجود یا عدم وجود خطا ارائه می دهد. همچنین می توانید کد هدر را بررسی کنید.

{
    "error": 1,
    "message": "An error ocurred"
}

Account

Get Account
GET https://3d-ul.ir/api/account

To get information on the account, you can send a request to this endpoint and it will return data on the account.

curl --location --request GET 'https://3d-ul.ir/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "data": {
        "id": 1,
        "email": "sample@domain.com",
        "username": "sampleuser",
        "avatar": "https:\/\/domain.com\/content\/avatar.png",
        "status": "pro",
        "expires": "2022-11-15 15:00:00",
        "registered": "2020-11-10 18:01:43"
    }
}
Update Account
PUT https://3d-ul.ir/api/account/update

To update information on the account, you can send a request to this endpoint and it will update data on the account.

curl --location --request PUT 'https://3d-ul.ir/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "email": "newemail@google.com",
    "password": "newpassword"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/account/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'email' => 'newemail@google.com',
  'password' => 'newpassword',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "message": "Account has been successfully updated."
}

اسپلش سفارشی

List Custom Splash
GET https://3d-ul.ir/api/splash?limit=2&page=1

To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).

پارامترشرح
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://3d-ul.ir/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/splash?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "splash": [
            {
                "id": 1,
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "name": "Product 2 Promo",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

دامنه های مارک دار

List Branded Domains
GET https://3d-ul.ir/api/domains?limit=2&page=1

To get your branded domains via the API, you can use this endpoint. You can also filter data (See table for more info).

پارامترشرح
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://3d-ul.ir/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/domains?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "domains": [
            {
                "id": 1,
                "domain": "https:\/\/domain1.com",
                "redirectroot": "https:\/\/rootdomain.com",
                "redirect404": "https:\/\/rootdomain.com\/404"
            },
            {
                "id": 2,
                "domain": "https:\/\/domain2.com",
                "redirectroot": "https:\/\/rootdomain2.com",
                "redirect404": "https:\/\/rootdomain2.com\/404"
            }
        ]
    }
}
Create a Branded Domain
POST https://3d-ul.ir/api/domain/add

A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.

پارامترشرح
domain (required) Branded domain including http or https
redirectroot (optional) Root redirect when someone visits your domain
redirect404 (optional) Custom 404 redirect
curl --location --request POST 'https://3d-ul.ir/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/domain/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'domain' => 'https://domain1.com',
  'redirectroot' => 'https://rootdomain.com',
  'redirect404' => 'https://rootdomain.com/404',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "id": 1
}
دامنه را به روز کنید
PUT https://3d-ul.ir/api/domain/:id/update

To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

پارامترشرح
redirectroot (optional) Root redirect when someone visits your domain
redirect404 (optional) Custom 404 redirect
curl --location --request PUT 'https://3d-ul.ir/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/domain/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'redirectroot' => 'https://rootdomain-new.com',
  'redirect404' => 'https://rootdomain-new.com/404',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "message": "Domain has been updated successfully."
}
Delete Domain
DELETE https://3d-ul.ir/api/domain/:id/delete

To delete a domain, you need to send a DELETE request.

curl --location --request DELETE 'https://3d-ul.ir/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/domain/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "message": "Domain has been deleted successfully."
}

پوشش های CTA

List CTA Overlays
GET https://3d-ul.ir/api/overlay?limit=2&page=1

To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).

پارامترشرح
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://3d-ul.ir/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/overlay?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "cta": [
            {
                "id": 1,
                "type": "message",
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "contact",
                "name": "Contact Page",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

پیوندها


پیکسل ها

List Pixels
GET https://3d-ul.ir/api/pixels?limit=2&page=1

To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).

پارامترشرح
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://3d-ul.ir/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/pixels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "pixels": [
            {
                "id": 1,
                "type": "gtmpixel",
                "name": "GTM Pixel",
                "tag": "GA-123456789",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "twitterpixel",
                "name": "Twitter Pixel",
                "tag": "1234567",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}
Create a Pixel
POST https://3d-ul.ir/api/pixel/add

A pixel can be created using this endpoint. You need to send the pixel type and the tag.

پارامترشرح
type (required) gtmpixel | gapixel | fbpixel | adwordspixel | linkedinpixel | twitterpixel | adrollpixel | quorapixel | pinterest | bing | snapchat | reddit | tiktok
name (required) Custom name for your pixel
tag (required) The tag for the pixel
curl --location --request POST 'https://3d-ul.ir/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/pixel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'gtmpixel',
  'name' => 'My GTM',
  'tag' => 'GTM-ABCDE',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "id": 1
}
پیکسل را به روز کنید
PUT https://3d-ul.ir/api/pixel/:id/update

To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

پارامترشرح
name (optional) Custom name for your pixel
tag (required) The tag for the pixel
curl --location --request PUT 'https://3d-ul.ir/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/pixel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'My GTM',
  'tag' => 'GTM-ABCDE',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "message": "Pixel has been updated successfully."
}
Delete Pixel
DELETE https://3d-ul.ir/api/pixel/:id/delete

To delete a pixel, you need to send a DELETE request.

curl --location --request DELETE 'https://3d-ul.ir/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/pixel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "message": "Pixel has been deleted successfully."
}

کانال ها

List Channels
GET https://3d-ul.ir/api/channels?limit=2&page=1

To get your channels via the API, you can use this endpoint. You can also filter data (See table for more info).

پارامترشرح
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://3d-ul.ir/api/channels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/channels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "channels": [
            {
                "id": 1,
                "name": "Channel 1",
                "description": "Description of channel 1",
                "color": "#000000",
                "starred": true
            },
            {
                "id": 2,
                "name": "Channel 2",
                "description": "Description of channel 2",
                "color": "#FF0000",
                "starred": false
            }
        ]
    }
}
List Channel Items
GET https://3d-ul.ir/api/channel/:id?limit=1&page=1

To get items in a select channels via the API, you can use this endpoint. You can also filter data (See table for more info).

پارامترشرح
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://3d-ul.ir/api/channel/:id?limit=1&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/channel/:id?limit=1&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "items": [
            {
                "type": "links",
                "id": 1,
                "title": "My Sample Link",
                "preview": "https:\/\/google.com",
                "link": "https:\/\/3d-ul.ir\/google",
                "date": "2022-05-12"
            },
            {
                "type": "bio",
                "id": 1,
                "title": "My Sample Bio",
                "preview": "https:\/\/3d-ul.ir\/mybio",
                "link": "https:\/\/3d-ul.ir\/mybio",
                "date": "2022-06-01"
            }
        ]
    }
}
یک کانال ایجاد کنید
POST https://3d-ul.ir/api/channel/add

A channel can be added using this endpoint.

پارامترشرح
name (required) Channel name
description (optional) Channel description
color (optional) Channel badge color (HEX)
starred (optional) Star the channel or not (true or false)
curl --location --request POST 'https://3d-ul.ir/api/channel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/channel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'New Channel',
  'description' => 'my new channel',
  'color' => '#000000',
  'starred' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "id": 3,
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}
Assign an Item to a Channel
POST https://3d-ul.ir/api/channel/:channelid/assign/:type/:itemid

An item can be assigned to any channel by sending a request with the channel id, item type (links, bio or qr) and item id.

پارامترشرح
:channelid (required) Channel ID
:type (required) links or bio or qr
:itemid (required) Item ID
curl --location --request POST 'https://3d-ul.ir/api/channel/:channelid/assign/:type/:itemid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/channel/:channelid/assign/:type/:itemid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "message": "Item successfully added to the channel."
}
به روز رسانی کانال
PUT https://3d-ul.ir/api/channel/:id/update

To update a channel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

پارامترشرح
name (optional) Channel name
description (optional) Channel description
color (optional) Channel badge color (HEX)
starred (optional) Star the channel or not (true or false)
curl --location --request PUT 'https://3d-ul.ir/api/channel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/channel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'Acme Corp',
  'description' => 'channel for items for Acme Corp',
  'color' => '#FFFFFF',
  'starred' => false,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "message": "Channel has been updated successfully."
}
Delete Channel
DELETE https://3d-ul.ir/api/channel/:id/delete

To delete a channel, you need to send a DELETE request. All items will be unassigned as well.

curl --location --request DELETE 'https://3d-ul.ir/api/channel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/channel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "message": "Channel has been deleted successfully."
}

کدهای QR

List QR codes
GET https://3d-ul.ir/api/qr?limit=2&page=1

To get your QR codes via the API, you can use this endpoint. You can also filter data (See table for more info).

پارامترشرح
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://3d-ul.ir/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/qr?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "qrs": [
            {
                "id": 2,
                "link": "https:\/\/3d-ul.ir\/qr\/a2d5e",
                "scans": 0,
                "name": "Google",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "link": "https:\/\/3d-ul.ir\/qr\/b9edfe",
                "scans": 5,
                "name": "Google Canada",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}
Get a single QR Code
GET https://3d-ul.ir/api/qr/:id

To get details for a single QR code via the API, you can use this endpoint.

curl --location --request GET 'https://3d-ul.ir/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/qr/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "details": {
        "id": 1,
        "link": "https:\/\/3d-ul.ir\/qr\/b9edfe",
        "scans": 5,
        "name": "Google Canada",
        "date": "2020-11-10 18:00:25"
    },
    "data": {
        "clicks": 1,
        "uniqueClicks": 1,
        "topCountries": {
            "Unknown": "1"
        },
        "topReferrers": {
            "Direct, email and other": "1"
        },
        "topBrowsers": {
            "Chrome": "1"
        },
        "topOs": {
            "Windows 10": "1"
        },
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "instagram": 0
        }
    }
}
Create a QR Code
POST https://3d-ul.ir/api/qr/add

To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

پارامترشرح
type (required) text | vcard | link | email | phone | sms | wifi
data (required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background (optional) RGB color e.g. rgb(255,255,255)
foreground (optional) RGB color e.g. rgb(0,0,0)
logo (optional) Path to the logo either png or jpg
curl --location --request POST 'https://3d-ul.ir/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/qr/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'link',
  'data' => 'https://google.com',
  'background' => 'rgb(255,255,255)',
  'foreground' => 'rgb(0,0,0)',
  'logo' => 'https://site.com/logo.png',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "id": 3,
    "link": "https:\/\/3d-ul.ir\/qr\/a58f79"
}
Update QR Code
PUT https://3d-ul.ir/api/qr/:id/update

To update a QR Code, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

پارامترشرح
data (required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background (optional) RGB color e.g. rgb(255,255,255)
foreground (optional) RGB color e.g. rgb(0,0,0)
logo (optional) Path to the logo either png or jpg
curl --location --request PUT 'https://3d-ul.ir/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/qr/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'link',
  'data' => 'https://google.com',
  'background' => 'rgb(255,255,255)',
  'foreground' => 'rgb(0,0,0)',
  'logo' => 'https://site.com/logo.png',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "message": "QR has been updated successfully."
}
Delete a QR Code
DELETE https://3d-ul.ir/api/qr/:id/delete

To delete a QR code, you need to send a DELETE request.

curl --location --request DELETE 'https://3d-ul.ir/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/qr/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "message": "QR Code has been deleted successfully."
}

کمپین ها

List Campaigns
GET https://3d-ul.ir/api/campaigns?limit=2&page=1

To get your campaigns via the API, you can use this endpoint. You can also filter data (See table for more info).

پارامترشرح
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://3d-ul.ir/api/campaigns?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/campaigns?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "campaigns": [
            {
                "id": 1,
                "name": "Sample Campaign",
                "public": false,
                "rotator": false,
                "list": "https:\/\/domain.com\/u\/admin\/list-1"
            },
            {
                "id": 2,
                "domain": "Facebook Campaign",
                "public": true,
                "rotator": "https:\/\/domain.com\/r\/test",
                "list": "https:\/\/domain.com\/u\/admin\/test-2"
            }
        ]
    }
}
یک کمپین ایجاد کنید
POST https://3d-ul.ir/api/campaign/add

A campaign can be added using this endpoint.

پارامترشرح
name (optional) Campaign name
slug (optional) Rotator Slug
public (optional) Access
curl --location --request POST 'https://3d-ul.ir/api/campaign/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/campaign/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'New Campaign',
  'slug' => 'new-campaign',
  'public' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "id": 3,
    "domain": "New Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/new-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/new-campaign-3"
}
POST https://3d-ul.ir/api/campaign/:campaignid/assign/:linkid

A short link can be assigned to a campaign using this endpoint. The endpoint requires the campaign ID and the short link ID.

curl --location --request POST 'https://3d-ul.ir/api/campaign/:campaignid/assign/:linkid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/campaign/:campaignid/assign/:linkid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "message": "Link successfully added to the campaign."
}
به روز رسانی کمپین
PUT https://3d-ul.ir/api/campaign/:id/update

To update a campaign, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

پارامترشرح
name (required) Campaign name
slug (optional) Rotator Slug
public (optional) Access
curl --location --request PUT 'https://3d-ul.ir/api/campaign/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/campaign/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'Twitter Campaign',
  'slug' => 'twitter-campaign',
  'public' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "id": 3,
    "domain": "Twitter Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/twitter-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/twitter-campaign-3"
}
Delete Campaign
DELETE https://3d-ul.ir/api/campaign/:id/delete

To delete a campaign, you need to send a DELETE request.

curl --location --request DELETE 'https://3d-ul.ir/api/campaign/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/campaign/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "message": "Campaign has been deleted successfully."
}

Plans

This endpoint is only accessible by users with admin privileges.

List Plans
GET https://3d-ul.ir/api/plans

Get a list of all plans on the platform.

curl --location --request GET 'https://3d-ul.ir/api/plans' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/plans",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "data": [
        {
            "id": 2,
            "name": "Business",
            "free": false,
            "prices": {
                "monthly": 9.9900000000000002131628207280300557613372802734375,
                "yearly": 99.9899999999999948840923025272786617279052734375,
                "lifetime": 999.990000000000009094947017729282379150390625
            },
            "limits": {
                "links": 100,
                "clicks": 100000,
                "retention": 60,
                "custom": {
                    "enabled": "0"
                },
                "team": {
                    "enabled": "0",
                    "count": "0"
                },
                "splash": {
                    "enabled": "1",
                    "count": "5"
                },
                "overlay": {
                    "enabled": "1",
                    "count": "10"
                },
                "pixels": {
                    "enabled": "1",
                    "count": "10"
                },
                "domain": {
                    "enabled": "1",
                    "count": "1"
                },
                "multiple": {
                    "enabled": "0"
                },
                "alias": {
                    "enabled": "1"
                },
                "device": {
                    "enabled": "0"
                },
                "geo": {
                    "enabled": "0"
                },
                "bundle": {
                    "enabled": "0"
                },
                "parameters": {
                    "enabled": "0"
                },
                "export": {
                    "enabled": "0"
                },
                "api": {
                    "enabled": "0"
                }
            }
        },
        {
            "id": 1,
            "name": "Starter",
            "free": true,
            "prices": null,
            "limits": {
                "links": 10,
                "clicks": 1000,
                "retention": 7,
                "custom": {
                    "enabled": "0"
                },
                "team": {
                    "enabled": "0",
                    "count": "0"
                },
                "splash": {
                    "enabled": "0",
                    "count": "0"
                },
                "overlay": {
                    "enabled": "0",
                    "count": "10"
                },
                "pixels": {
                    "enabled": "0",
                    "count": "10"
                },
                "domain": {
                    "enabled": "0",
                    "count": "0"
                },
                "multiple": {
                    "enabled": "0"
                },
                "alias": {
                    "enabled": "0"
                },
                "device": {
                    "enabled": "0"
                },
                "geo": {
                    "enabled": "0"
                },
                "bundle": {
                    "enabled": "0"
                },
                "parameters": {
                    "enabled": "0"
                },
                "export": {
                    "enabled": "0"
                },
                "api": {
                    "enabled": "0"
                }
            }
        }
    ]
}
Subscribe a User to a Plan
PUT https://3d-ul.ir/api/plan/:planid/user/:userid

To subscribe a user to plan, send a PUT request to this endpoint with the plan id and user id. The type of subscription and the expiration date will need to be specified. If the expiration date is not specified, the date will be adjusted according to the type.

پارامترشرح
type monthly | yearly | lifetime
expiration (optional) Expiration date of the plan e.g. 2023-03-05 18:06:12
curl --location --request PUT 'https://3d-ul.ir/api/plan/:planid/user/:userid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "monthly",
    "expiration": "2023-03-05 18:06:12"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/plan/:planid/user/:userid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'monthly',
  'expiration' => '2023-03-05 18:06:12',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "message": "User has been subscribed to this plan."
}

Users

This endpoint is only accessible by users with admin privileges.

List Users
GET https://3d-ul.ir/api/users?filter=free

Get a list of all users on the platform. Data can be filtered by sending a filter parameter in the url.

پارامترشرح
filter admin | free | pro
email Search a user by email
curl --location --request GET 'https://3d-ul.ir/api/users?filter=free' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/users?filter=free",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "data": [
        {
            "id": 2,
            "email": "sample2@domain.com",
            "username": "sample2user",
            "avatar": "https:\\\/\\\/domain.com\/content\/avatar2.png",
            "status": "free",
            "planid": 1,
            "expires": null,
            "registered": "2020-11-10 18:01:43",
            "apikey": "ABC123DEF456"
        },
        {
            "id": 1,
            "email": "sample@domain.com",
            "username": "sampleuser",
            "avatar": "https:\\\/\\\/domain.com\/content\/avatar.png",
            "status": "pro",
            "planid": 2,
            "expires": "2022-11-15 15:00:00",
            "registered": "2020-11-10 18:01:43",
            "apikey": "ABC123DEF456"
        }
    ]
}
List a Single User
GET https://3d-ul.ir/api/user/:id

Get data for a single user.

curl --location --request GET 'https://3d-ul.ir/api/user/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/user/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "data": {
        "id": 2,
        "email": "sample2@domain.com",
        "username": "sample2user",
        "avatar": "https:\\\/\\\/domain.com\/content\/avatar2.png",
        "status": "free",
        "planid": 1,
        "expires": null,
        "registered": "2020-11-10 18:01:43",
        "apikey": "ABC123DEF456"
    }
}
Create User
POST https://3d-ul.ir/api/user/add

To create a user, use this endpoint and send the following information as JSON.

پارامترشرح
username (required) User's username. Needs to be valid.
email (required) User's email. Needs to be valid.
password (required) User's password. Minimum 5 characters.
planid (optional) Premium plan. This can be found in the admin panel.
expiration (optional) Membership expiration example 2020-12-26 12:00:00
curl --location --request POST 'https://3d-ul.ir/api/user/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "username": "user",
    "password": "1234567891011",
    "email": "demo@yourwebsite.com",
    "planid": 1,
    "expiration": "2020-11-20 11:00:00"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/user/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'username' => 'user',
  'password' => '1234567891011',
  'email' => 'demo@yourwebsite.com',
  'planid' => 1,
  'expiration' => '2020-11-20 11:00:00',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "message": "User has been registered.",
    "data": {
        "id": 3,
        "email": "demo@yourwebsite.com",
        "username": "user"
    }
}
Delete User
DELETE https://3d-ul.ir/api/user/:id/delete

To delete a user, use this endpoint.

curl --location --request DELETE 'https://3d-ul.ir/api/user/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/user/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "message": "User has been deleted."
}
Login User
GET https://3d-ul.ir/api/user/login/:id

This endpoint will generate a unique link that will allow the user to automatically login to the platform. SSO login urls are valid for 1 hour and they can be used a single time.

curl --location --request GET 'https://3d-ul.ir/api/user/login/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://3d-ul.ir/api/user/login/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
پاسخ سرور
{
    "error": 0,
    "url": "https:\/\/3d-ul.ir\/user\/login\/sso\/kxxocrcsrxpshqhbgfcffqqufrrctlrj"
}